HRC-G1 series devices are high precision temperature controllers with a single card, single zone, modular LCD display. The automatic and manual operation transition is done with a single button.
It is PID controlled, has AT Autotuning function and Soft Start output feature.
While the Soft start feature is active, the temperature increases by 1% per second up to 50%. It stays at 50% until it reaches 100 C. Then it reaches the desired temperature. This function prevents the resistance from being damaged due to moisture.
When we set the manual output percentage value in advance, if the thermocouple breaks during operation, the device automatically enters the circuit according to the percentage we set and continues to operate.
Alarms
Thermocouple open alarm
Thermocouple reverse connection alarm
Lower and upper limit deviation alarm
Resistance failure alarm
Relay failure alarm
Device Functions
There are 4 main control modes;
Normal (Automatic PID) mode; The device automatically reaches the temperature we set by calculating the device parameters. Manual Mode; When the thermocouple is damaged in the heater, the operation continues by entering the percentage value manually in this mode. Optionally, it allows operation without a thermocouple.
Stand by mode; Standby Mode, without changing the temperature degree we set, allows us to reduce the temperatures of the resistances to the desired degree for a certain period of time and wait for the desired time. After the set time, it automatically continues to operate at the set value.
AT (PID Auto Tune) Mode; Generally, the AT function is executed only when the PID factory setting system requirements cannot be met. After the automatic adjustment is completed, the optimum PID value is saved and the control returns to normal (automatic PID) mode.
Automatic Soft Start initiation. (Feature to manually adjust the Soft start time)
Feature to enter how many minutes the resistance will reach the desired temperature.
