Address: Eyüp / İstanbul
  • TR
  • EN
  • RU
  • AR
  • IT

Flexible Heaters

Features

It is the most advanced technological solution for heating the injection manifold. The square section of the resistor, which has the feature of resistance, provides a very high level of heat transfer. It is very easy to install. No fixing is required for the resistor to sit. Simply open a square sectioned socket and press the resistor into this socket. Square section resistors guarantee heat transfer by fixing it to the socket and contacting the resistor from 3 surfaces.

Technical Information

  • Sections: 6X6 mm
  • Section surfaces tolerance: ± 0.15 mm
  • Length tolerance: ± 5 mm for lengths up to 250 mm
  • and ± 2 mm for lengths longer than 250 mm. The length of the non-heated part is ± 5 mm at each end of the resistor
  • Power tolerance: ± 5% / -10%
  • Electric power: 1500 V
  • Electrical insulation cold conditions 1000 VDC: >10 MΩ
  • Current leakage cold conditions: <0.1A
  • Insulation hot conditions: 500 VDC: >10 MΩ, maximum operating temperature (outer plate): 750 ˚C
  • Plate material: AISI stainless steel
  • Minimum bending radius according to the resistor axis, 6X6mm section: 15 mm
  • Section surfaces tolerance: ± 0.15 mm
  • Important: The non-heated (round) part at both ends should not be bent.
Download Catalog PDF
Flexible Heaters